AGA GC 3 Wartungshandbuch PDF herunterladen (Seite 27)

HANDRAIL FITTING - MODULE ONL

Prior to fitting the cooker top plate and hot cupboard/electric module top plate to the appliance:-

z Ensure the self adhesive silicone strip is fitted to the underside of the hot cupboard/electric module overlap to

protect the enamel and the jointing bracket fixing plate is fitted to the L.H. side of the cooker top plate.

z Fit all threads to the two end brackets.

z Fit one end bracket to the R.H. side of the cooker top plate, placing the fibre protection washer between the bracket

and the top plate lock in position with shakeproof washer and two hex. nuts.

z Fit the other end bracket to the L.H. side of the hot cupboard/electric module top plate as R.H.

The cooker and hot cupboard/electric module top plates can now be fitted to the appliance. (DO NOT SECURE COOKER

AND HOT CUPBOARD/ELECTRIC MODULE TOP PLATES AT THIS STAGE).

z Place one end cap on each handrail as shown.

z Hold handrail jointing bracket away from the cooker and locate the two handrails in the two end brackets and the

jointing bracket. Push towards the cooker.

z Position and fix the jointing bracket to the cooker and hot cupboard/electric module top plates with socket screws

and small fibre washers ensuring jointing bracket gasket is placed between the jointing bracket and top plates.

z Fit the two top plates securely to the appliance with corner stay nuts and buttons.

END BRACKET (2)

FIBRE

WASHERS (2)

SOCKET

SCREWS (2)

JOINTING BRACKET

FIXING PLATE

COOKER

HANDRAIL

JOINTING

BRACKET

SILICON

STRIP

JOINTING

BRACKET

GASKET

END CAP (4)

HOT CUPBOARD

HANDRAIL

FIBRE PROTECTION

WASHERS (2)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 47 48

Keine Kommentare

AGA GC 3 Wartungshandbuch Seite 27