AGA EC3 Betriebsanweisung PDF herunterladen (Seite 13)

This screen shows that the ovens will be up at ‘Normal’ temperature between 07:00 and 10:00

the ovens will then go to the ‘Low’ mode.

The ovens will come up to ‘Normal’ once more in that day i.e. at 16:00 until 19:00. After the

evening the system will automatically enter ‘Slumber’ mode its lowest setting until next morning.

Boost

If cooking is required when the Aga is in the AIMS programme i.e ‘Low’ or ‘Slumber’, you can

boost the cooking temperature by pressing the Button which will bring the Aga upto

‘Normal’ operating temperature. This will take up to 2 hours from ‘Low’ and 4 hours from

‘Slumber’.

AIMS PROGRAMME SCREEN

Fig. 11 DESN 515274

Use the button to activate this screen and to move through the different actions

and set an AIMS programme. To go back a step at any time press .

1. Set the frequency of the programme Once or Twice daily using + and - buttons.

2. Press button to select start time for ‘Normal’ setting then use the + or - buttons to

set start time.

3. Press the button to select finish time then use + and - buttons to set finish time.

When a time is selected it will be highlighted in dark blue.

4. Press the button then press the button to alter the temperature setting to ‘Low’,

‘Slumber’, or ‘Off’. (Repeat steps 2 - 4 to set a 2nd event)

To copy this days settings for the next day press the button or alternatively press

the button to enter different settings for next day.

Each push of the copy button steps onto next day. When the desired days have been

programmed a return must be made to the main menu screen by pressing the button.

A‘Please Wait’ message will display to confirm changes are being sent to the base unit.

If the programme is not set for the whole week the programme for the remaining days will

revert to a default setting. ie: 8:00 am - 9:00 am and 18:00 - 19:00.

To change a setting within the AIMS program, press the button until the desired setting

is reached. Then change setting using either the +, - or buttons as appropriate.

If no other changes are to be made,push the button to transmit the change (s) and

return to main menu. A message saying ‘Please Wait’ will display, indicating that the

changes are being transmitted to the base unit. Unless this shows, the changes will not

have been implemented.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

AGA EC3 Betriebsanweisung Seite 13